Curtain Pendant Weights

Author: z Release time: 2024-07-23 11:32:41 View number: 64

The function of curtain lead block is that it is an accessory used for the bottom of curtains, usually a circular or oval lead block. Its function is to help the curtains become more vertical and prevent them from swaying in the wind.
Instructions for using lead blocks for curtains:

hang the curtain on the curtain rod and thread the curtain rope through the curtain ring.
Find the position where the curtain lead block needs to be installed on the inside of the curtain fabric at the bottom of the curtain, and make a small incision from the bottom of the curtain fabric.
Place the curtain lead block into the small opening and re sew the curtain fabric to ensure that the curtain lead block does not fall off.
Pull the bottom of the curtain by hand and check if the curtain lead block is firmly fixed at the bottom of the curtain. If necessary, some stitching can be reinforced around the lead block.
hang the curtain back onto the curtain rod and adjust the length of the curtain rope to make the bottom of the curtain naturally vertical.

When using curtain lead blocks, attention should be paid to their weight. If the lead block of the curtain is too heavy, it may cause excessive sagging of the curtain and affect its appearance. Therefore, when purchasing curtain lead blocks, it is necessary to choose a model that is suitable for the weight of your curtains
When cutting open the curtain fabric at the bottom of the curtain, be careful not to cut the front of the curtain fabric. Otherwise, the aesthetic appeal of the curtains will be affected.
When using curtain lead blocks, attention should be paid to the safety of children. Curtain lead blocks may pose a risk of accidental ingestion or inhalation by children, therefore they need to be placed out of reach of children.

The above is an introduction to the use of curtain lead blocks, hoping to be helpful to you!